Our Large Angle Corrugated Edge Conveyor and Large Angle Corrugated Edge Conveyor Belt both support steep and vertical conveying. Compare their operating angle, application range, construction, and maintenance points before choosing the product format for your material flow.
At a glance
Maximum conveying angle
Typical application sectors
Construction emphasis
Maintenance emphasis
The two options at a glance
The Large Angle Corrugated Edge Conveyor is the complete conveying arrangement, with a base belt, wavy blocking edge, and partition. The Large Angle Corrugated Edge Conveyor Belt is the belt-focused option within a high-inclination conveying system, supported by drive, drums, rollers, a tensioning device, and frame components.
| Criterion | Large Angle Corrugated Edge Conveyor | Large Angle Corrugated Edge Conveyor Belt |
|---|---|---|
| Maximum conveying angle | Up to 90° | Up to 90° |
| Typical application sectors | Vertical shafts, coal mines, subways, dump ships, continuous unloaders, grain, metallurgy, chemical industry, cement, building materials, food processing, frozen food production lines, and vegetable or fruit workshops | Coal, grain, building materials, construction, metallurgy, electricity, chemical, and light industry |
| Construction emphasis | Base belt, wavy blocking edge, and T-, C-, or TC-shaped partition | Drive device, drive drum, reversing drum, belt rollers, support rollers, vertical rollers, cleaning device, spiral tensioning device, rack, funnel, cover, guide groove, and middle frame |
| Maintenance emphasis | Simple structure and maintenance similar to a universal belt conveyor | Belt tension, belt support, deviation control, cleaning, and roller support are addressed through the listed components |
Operating requirements
Choose the Large Angle Corrugated Edge Conveyor when the project requires a complete large-angle conveying arrangement and the partition must match the material and inclination. The T-shaped partition suits an inclination angle β ≤ 40°. The C-shaped partition suits β > 40° when the material has good flowability. The TC-shaped partition suits β > 40° when material viscosity is high.
Choose the Large Angle Corrugated Edge Conveyor Belt when the purchasing decision centers on the belt and its supporting conveying components. This option is specified for bulk materials with a bulk density of 0.5-2.5t/m³, an environmental range of -25~40 ℃, and a maximum conveyed material block size of 550mm.
Both options reach a maximum conveying angle of 90°, so the layout decision can include steep slopes and vertical conveying. Measure the height difference, conveying route, material flowability, and material size before confirming the configuration.
Interfaces and system layout
The complete conveyor arrangement is the clearer fit when you are coordinating the base belt, corrugated edge, partition, and horizontal connections at the nose and tail. The horizontal sections can connect with other conveying equipment, and the special skirt and baffle design helps prevent material overflow or accumulation during transportation.
The belt-focused option is organized around the power and support path. Its drive device includes a Y series electric motor, a ZJ type shaft mounted reducer, and a wedge type backstop. The system also uses drive and reversing drums, upper parallel rollers, lower flat rollers, vertical rollers, a beating wheel cleaning device, and a spiral tensioning device.
Check the available installation space and the required transition sections. The complete arrangement is suited to projects where footprint reduction and floor-to-floor conveying are central layout concerns. The belt-focused option suits a line specification that must coordinate drive, tension, support, cleaning, and frame interfaces.
The Large Angle Corrugated Edge Conveyor suits buyers planning a complete steep-angle or vertical conveying arrangement with a selected partition. The Large Angle Corrugated Edge Conveyor Belt suits buyers specifying the belt, drive, support, tensioning, cleaning, and frame interfaces for a high-inclination line.
The two options
Large Angle Corrugated Edge Conveyor
Large Angle Corrugated Edge Conveyor Belt
Maintenance points to compare
The complete Large Angle Corrugated Edge Conveyor uses a simple structure based on universal belt conveyor maintenance. Its main selection check is the relationship between inclination, material flowability, and partition type.
The Large Angle Corrugated Edge Conveyor Belt requires attention to the components that guide and support the belt. The tensioning device provides sufficient tension to prevent slippage between the belt and drive drum. Vertical rollers limit belt deviation in the upper and lower transition sections, while the beating wheel cleaning device shakes material from the belt back.
For a wholesale large angle corrugated edge conveyor belt order, send the conveying angle, material type, bulk density, maximum block size, environmental temperature range, route layout, and required interface arrangement with your inquiry. We can then match the request to the complete conveyor or belt-focused configuration.
The company
Hebei Roule Transport Machinery Manufacturing Co.,Ltd
Hebei Roule Conveyor Machinery Manufacturing Co., Ltd. is a strong factory specializing in research and development, design, production, and sales. Since its establishment in 2010, we have been striving for excellence and committed to the development of the conveyor machinery industry. Our company specializes in roller series, conveyor belt series, conveyor belt series, drum series, and supporting conveyor machinery accessories.…
About Us ↗Visit company website ↗


